|
CSA-Series |
|
2-Way Speaker Cabinet FULL RANGE PASSIVE CSA-Series style Speaker cabinet with a new look under the brand NPE AUDIO NPE Industry (Thailand) Co., Ltd. Is a designer and manufacturer. Which has been adjusted in terms of the shape that can be adjusted to make it more versatile, both hanging or standing Including the grille that has been designed to be more beautiful and strong. In terms of sound quality, the CSA-Series has good sound quality in all frequency bands. Sharp in the mid-treble area. Clean in the high sound area. With the equipment used to be assembled, they are all materials with good properties. Whether the speaker Electronic parts that make up the Passive Network, the speaker cabinet design is very detailed. Choosing a balanced low-mid and high-mid range speaker. Choosing a horn mouth that will go with a high-pitched speaker. The volume of the speaker cabinet that must be designed to suit the speaker continually comes to the set of sound frequencies so that the low and mid-range speakers can work at full efficiency when we determine the appropriate frequency band and then select the equipment grade. The electronics that will come together to form a 2-way Passive Crossover Network by creating a circuit and choosing an electronic device. to determine the sound frequency band. There is also an audio band meter device. High quality to help the design team in working as well. There are 4 models of CSA-Series speaker cabinets: • CSA-115 size 15 inches. • CSA-112 size 15 inches. • CSA-110 size 15 inches. • CSA-108 size 15 inches. 2-Way FULL RANGE speaker cabinet. The interior consists of 2 CELESTION loudspeakers from England, divided into 1 MID / LOW and 1 MID / HIGH per 1 cabinet. You can choose to use the CSA-SERIES speaker cabinet according to the reception. The output power of the speaker cabinet is as follows: |
|
CSA-115 |
| Full Range Speaker Cabinet, 2-way, size 15 "in the cabinet consists of a low-noise speaker model TF1520 Voice Coil size 50 mm. The wire that the Voice Coil is wrapped in is round copper. The speaker cone is Kevlar Loaded Paper. It can receive continuous power of 150 watts ( RMS) at an impedance of 8 ohms, 1 inch high speaker, model CDX1-1010 Voice Coil, size 25 mm, the wire that wraps the Voice Coil is a copper clad aluminum. The speaker cone is a PETP File, capable of receiving continuous power of 15 watts (RMS) at an impedance of 8 ohms. Compatible with a 1-inch plastic horn mouth, model H1SC-8050 when assembled as a speaker cabinet. Can receive 150 watts of continuous power (RMS) and 600 watts peak resonant power (PEAK) for a loudness at a distance of 1 meter, 1 watt of power output to 96 decibels, a frequency response of 60Hz - 20KHz. The sound distribution angle horizontally at 80 degrees and vertically at 50 degrees. The connector for the speaker cable is Speakons 4P, 2 units, is a speaker cabinet that has clear sound characteristics, bright but hidden with a soft depth, dimension, suitable for listening to music, work. Booth events, conference rooms, seminars or small parties, etc. |
|
SPECIFICATION |
CSA - 115 |
|
Components |
1 x 15" LF Driver, Voice Coil 50mm |
|
Frequency Response |
60Hz - 20kHz |
|
Despersion |
80๐ Horizontal x 50๐ Vertical |
|
Power Handling |
150Wrms 300W Music Program |
|
Sensitivity 1W @ 1M |
96 dB |
|
Maximun SPL |
120dB Continuous / 126dB Peak |
|
Nominal Impedance |
8 Ω |
|
Comstruction |
15mm PU Medium-Density Fibreboard Enclosure with Two Recessed Carrying Handles |
|
Connectors |
2 x NL4MP Speakons 4 pole (pin 1+1-: Full Range / pin 2+2-: NC) |
|
Dimensions (WxHxD) |
460 x 675 x 455 mm. |
|
Net Weight |
23kg (50.7 lbs) |
|
CSA-112 |
| Full Range Speaker Cabinet, 2-way, size 12”, inside the cabinet consists of a low-noise speaker model TF1220 Voice Coil, size 50 mm, the wire that the Voice Coil is wrapped in round copper, the speaker cone is Kevlar Loaded Paper, capable of receiving continuous power of 150 watts ( RMS) at an impedance of 8 ohms, 1 inch high speaker, model CDX1-1010 Voice Coil, size 25 mm, the wire that wraps the Voice Coil is a copper clad aluminum. The speaker cone is a PETP File, capable of receiving continuous power of 15 watts (RMS) at an impedance of 8 ohms. Compatible with a 1-inch plastic horn mouth, model H1SC-8050 when assembled as a speaker cabinet. Can receive 150 watts of continuous power (RMS) and 600 watts peak resonant power (PEAK) for a loudness at a distance of 1 meter, 1 watt of power output to 97 decibels, a frequency response of 65Hz - 20KHz. The sound distribution angle horizontally at 80 degrees and vertically at 50 degrees. The connector for the speaker cable is Speakons 4P, 2 units, is a speaker cabinet that has a clear, bright sound, but has a deep, dimensional sound, suitable for listening to music, work. Booth events, conference rooms, seminars or small parties, etc. |
|
SPECIFICATION |
CSA - 112 |
|
Components |
1 x 12" LF Driver, Voice Coil 50mm 1 x 1"HF Compression Driver, Voice Coil 25mm |
|
Frequency Response |
65Hz - 20kHz |
|
Despersion |
80๐ Horizontal x 50๐ Vertical |
|
Power Handling |
150Wrms 300W Music Program |
|
Sensitivity 1W @ 1M |
96 dB |
|
Maximun SPL |
120dB Continuous / 126dB Peak |
|
Nominal Impedance |
8 Ω |
|
Comstruction |
15mm PU Painted Medium - Density Fibreboard Enclosure with Two Recessed Carryong Handles |
|
Connectors |
2 x NL4MP Speakons 4 pole (pin 1+1-: Full Range / pin 2+2-: NC) |
|
Dimensions (WxHxD) |
375 x 600 x 427 mm. |
|
Net Weight |
19.4kg (48.68 lbs) |
|
CSA-110 |
| Full Range Speaker Cabinet, 2-way, size 10 "in the cabinet, consists of a low-noise speaker model TF1018 Voice Coil, size 45 mm, the wire that wraps the Voice Coil is round copper, the speaker cone is Kevlar Loaded Paper, can receive continuous power of 100 watts ( RMS) at an impedance of 8 ohms. The speaker is 1 inch high, model CDX1-1010 Voice Coil, size 25 mm. The wire that wraps the Voice Coil is a copper-clad aluminum. The speaker cone is a PETP File, capable of receiving continuous power of 15 watts (RMS) at an impedance of 8 ohms. Compatible with a 1-inch plastic horn mouth, model H1SC-8050 when assembled as a speaker cabinet. Able to receive a continuous output power of 100 watts (RMS) and a peak pulsating power (PEAK) of 400 watts, giving a loudness value at a distance of 1 meter, an output power of 1 watt to 96 decibels, a frequency response of 70Hz - 20KHz. The sound distribution angle horizontally at 80 degrees and vertically at 50 degrees. The connector for the speaker cable is 2 Speakons 4P. It is a speaker cabinet that has the characteristics of clear sound, bright but hidden with a soft depth, dimension, suitable for listening to music, work. Booth events, conference rooms, seminars or small parties, etc. |
|
SPECIFICATION |
CSA - 110 |
|
Components |
1 x 12" LF Driver, Voice Coil 50mm 1 x 1"HF Compression Driver, Voice Coil 25mm |
|
Frequency Response |
70Hz - 20kHz |
|
Despersion |
80๐ Horizontal x 50๐ Vertical |
|
Power Handling |
100Wrms 200W Music Program |
|
Sensitivity 1W @ 1M |
96 dB |
|
Maximun SPL |
119dB Continuous / 125dB Peak |
|
Nominal Impedance |
8 Ω |
|
Comstruction |
15mm PU Painted Medium - Density Fibreboard Enclosure with Two Recessed Carryong Handles |
|
Connectors |
2 x NL4MP Speakons 4 pole (pin 1+1-: Full Range / pin 2+2-: NC) |
|
Dimensions (WxHxD) |
320 x 506 x 335 mm. |
|
Net Weight |
13.2 kg (29.04 lbs) |
|
CSA-108 |
| Full Range Speaker Cabinet, 2-way, size 8 "in the cabinet, consists of a low-noise speaker model TF0818 Voice Coil, size 45 mm, the wire that wraps the Voice Coil is round copper. The speaker cone is Kevlar Loaded Paper, capable of receiving a continuous power of 100 watts (RMS) at an impedance of 8 ohms. The 1-inch high-pitched speaker model CDX1-1010 Voice Coil is 25 mm. The wire that wraps the Voice Coil is copper clad. Aluminum speaker cone part is PETP File can receive continuous power of 15 watts (RMS) at 8 ohm impedance. Compatible with 1-inch plastic horn mouth, model H1SC-8050 when assembled as a speaker cabinet. Able to receive continuous power of 100 watts (RMS) and peak resonant power (PEAK) of 400 watts, giving a loudness value at a distance of 1 meter, an output power of 1 watt to 94 decibels, a frequency response of 70Hz - 20KHz. Angle of broadcasting horizontally at 80 degrees and vertically at 50 degrees. Speaker connectors are a Speakons 4P number 2 is a speaker cabinet that looks like. of sound that is clear, bright, but hidden with deep softness It has dimensions suitable for listening to music, booth events, conference rooms, seminars or small parties, etc. |
|
SPECIFICATION |
CSA - 108 |
|
Components |
1 x 12" LF Driver, Voice Coil 50mm 1 x 1"HF Compression Driver, Voice Coil 25mm |
|
Frequency Response |
70Hz - 20kHz |
|
Despersion |
80๐ Horizontal x 50๐ Vertical |
|
Power Handling |
100Wrms 200W Music Program |
|
Sensitivity 1W @ 1M |
94 dB |
|
Maximun SPL |
117dB Continuous / 123dB Peak |
|
Nominal Impedance |
8 Ω |
|
Comstruction |
15mm PU Painted Medium - Density Fibreboard Enclosure |
|
Connectors |
2 x NL4MP Speakons 4 pole (pin 1+1-: Full Range / pin 2+2-: NC) |
|
Dimensions (WxHxD) |
275 x 440 x 275 mm. |
|
Net Weight |
10.6 kg (23.32 lbs) |
| Installation style |
|
- Fixed Installation : Can be hung permanently or temporarily using Eyebolt M8 x 30 mm. Can be used with Shackle (Skenyou) to hang on a sling to adjust the vertical and horizontal sound distribution angle. |
|
- Stand Mountable : Can be installed on speaker stand for announcements, seminars or general events to distribute sound evenly. |